My ClickBD
Function Direct/Reverse Flush Ultrasonic cleaning To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely. Uniformity/Sprayability test To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush. Leakage test To test the sealing and dribbling conditions of injectors under system pressure. Injecting flow test To check the injecting amount of the injector in 15 seconds of constant injection. Automatic test To test injectors by simulating different working conditions. On-vehicle cleaning (Optional) The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle. Electronic-controlled drain system The unit is equipped with electronic-controlled drain system, for easier empty the cleanser oil tank and clean the tank. Specification Voltage: AC220V / AC110V Input Power: 200W Ultrasonic cleaner Power: 100W Pressure: 0 ~ 7 Bar Accuracy of tube: 2% RPM range: 0 ~ 9999 RPM, step: 10 RPM PW range: 0.1 ~ 30 ms, step: 0.1 ms Timing: 1 ~ 30 minutes Display: LED ***************Ready Stock*************** |