Electronics sewing machine

Features:
Hand held or desk top sewing machine
Sew clothes with single sewing line
Selective Gear fast/slow
Streamline appearance design
Fix, mend or repair in seconds
More portable than your big bulky sewing machine
Ideal for household, offices, students and craftspeople
Light weight, compact and portable to carry
Powered by 4*AA 1.5V battery or AC/DC 6V 1000MA adapter (not included)
For correct operation, please see instruction manual before using
Size: Approx.200*150*80MM (L*W*H).
Method of Operation:
Use hand wheel to raise the needle to the top position, lift the cloth pressing board by using the back handle and then put the cloth; Put down cloth pressing board, clockwise rotate hand wheel for some rounds to switch on for sewing .
There is an adjusting speed switch with "high" and "low" gears at the back of the machine, it is high speed gear when pressing the button, press it again, it is low speed gear when it rises.
Use hand to guide cloth for straight or turning movement. Make it move naturally and do not pull forcefully so as to avoid to break or jump thread.
Turn off the motor after using and rotate hand wheel to raise the needle to the top position. Pull out the thread from needle for 15-25mm and cut the thread. (Attention: Do not pull forcefully thread or cloth to avoid damaging the machine parts or needling) .
Raise cloth pressing board by using cloth pressing board handle. Lightly pull out cloth, upturn the sewed cloth and draw out thread, then knot in accordance with attached drawing 2.
Method of knotting:
Firstly draw the last line thread in threaded;
Draw the remained thread adversely go across threaded;
Draw 10mm thread from the last line to form a thread ring;
Pull out the thread from the remained thread and tighten it to complete knotting;
Or pull the thread tail on the face to the back face of cloth, in this case steps 1-4 are not allowed.
Adjustment of density of stitch:
If the stitches are too dense, anticlockwise l