USB 3.0 PCI-E PCI Express Extension Cable 1X to 16X Extender Riser Mining Dedicated Graphics Card Adapter with SATA 15Pin-
1. Model:PCE164P-N03 VER006C
2. Safer, more efficient, more practical
3. 6PIN adapter 12V DC-DC to strengthen the power supply, the graphics card power supply independent from the motherboard, which to reduce the burden on the motherboard when connect multi-graphics card
4.Graphics card power supply with four solid capacitors, graphics card power supply more stable and secure.
5. Solve the problem that welding point fragile burn, transmission signal attenuation, platoon line length is not enough and so on
6. Slots with fixed card buckle, remove the graphics card and the fixed graphics, the graphics card will not fall off from the slot
7. PCI-E connector with multi-layer shielded wire, the longest can connect 3 Meters the signal will not attenuate
1.Power Connector: 6 pin power cable
2.The board size:12.7cm*4.2cm
3.USB Cable Length:60cm
4.Compatible use: with any graphics cards
1. This extension is applicable to the mainboard PCI - E slot (1 x 2 x, 4 x 8 x 16 x). Please plug in the power cord for the floppy. When plug PCI - E extension must be computer broken wires plug again.
2. The form a complete set of wire rod is customized, never grab line to plug in. Remember that!
3. When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken.
4. Dual-core graphics Suggestions with the old line, the mainboard is 16 x also recommends using the old row line!
1* PCI-E 16X adapter
1* PCI-E 1X riser board
1* USB3.0 cable
1* 6Pin Power cable