My ClickBD
Stereo Integrated Amplifier Music power (0.3% of a distortion, 1kHz, IHF) 220W (4ohm) 145W (8ohm) Continuous rating output (0.3% of a distortion, 1kHz, both ch(es) operation) 64W+64W (4ohm) 50W+50W (8ohm) Effective output (0.3% of a distortion, 1kHz, one-side-channel operation) 60W/60W (8ohm) Frequency characteristic AUX: 20Hz-50kHz±1dB Output bandwidth (0.3% of distortion regularity, IHF) 20Hz - 50kHz SN ratio (a volume maxima, tone middle point) It is IHF at the time of an effective output. Phono MAG:80dB AUX:100dB Distortion 0.08% or less (6W-45W, 1kHz) Input sensitivity/impedance Phono 1, 2(man-month):3mV /, 43kohm Phono 2(MC): 0.155mV/150 ohm Phono/CER: 71mV / 100kohm MIC: 1.9mV / 50kohm Tape Head: 1.8mV / 150kohm Tuner, Tape Monitor, AUX:180mV /, 200kohm Main Input: 500mV / 100kohm Dumping factor 67 (8 ohm, 1kHz) or more Output-terminal The termination for speakers: 4ohms - 16ohms Headset jack Tapes simultaneous recording termination (Tape-Rec) DIN specification TAPE recording-play connector Preamplifier output (Pre Out, 3V) Center channel output (Center Out, 500mV) Equalizer Phono:RIAA Tape Head:NAB Remains noise (a volume min, tone middle point) 0.8mV or less (8ohm) An attached organization Tone control (3dB step) High/Low filter Loudness contour Audio muting (-20dB) AC plug socket (Two interlocks. One non-interlocking line ) Supply voltage AC100V, 50Hz/60Hz Power consumption At the time of a non-signal: 40VA Maxima: 250VA Dimensions Width 405x height 140x depth of 339mm Weight 12.3kg |