Splicer Machine FUJIKURA-80S

One year Warranty

The FSM-80S is core-to-core alignment single fiber splicer succeeding to FSM-60S. In addition to ruggedized concept, which 60S created, the 80S has a series of new features, such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for
quicker preparation, "powerful Li-ion battey" for longer operation, high resolution bigger LCD monitor, and "built-in operation manuals" in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.

Applicable fibres SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653),
NZDS (ITU-T G.655),Others
Fibre Count Single
Cladding diameter 80 to 150μm
Coating diameter 100 to 1000μm
Fibre cleaved length 5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900
Actual average splice loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS.
Splice time 7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode
Return loss 60dB or greater
Splicing modes 100 splicer modes are available
Splice loss estimate Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate.
Attenuation splice function Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an
inline fixed attenuator
Storage of splice result The last 2000 results to be stored in the internal memory.
Magnification X / Y (300X magnification), or both X and Y simultaneously (160X magnification)
Viewing method By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor
Tension test 1.96 to 2.25N
Operating condition 0-5000m above sea level, 0-95% RH and -10 to 50°C respectively.
Tube heater Built-in auto-start tube heater with 10 heating modes and up to 20 for reference
Tube heat time 13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available
Applicable protection
sleeve length 60mm, 40mm and a series of micro sleeves.
No. of splice/heating
with battery 200 times of splicing and heat shrinking under with BTR-09
Power supply Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09
Terminals USB2.0 ( Mini-B) for data and video signal transfer to PC.
Wind protection Up to 15m/s wind velocity
Dimensions 146(W) x 159(D) x 150(H) mm
Including wind protector, monitor, and rubber protector
Excluding rubber foot
Weight 2.5 kg, with ADC-18 AC adaptor
2.7 kg, with BTR-09 battery
Electrode life 3000 arc-discharges

• IT COLLECTION-DHAKA
ECS COMPUTER CITY
Multiplan Center, 69-71,
New Elephantet Road, Dhaka
(10 Level), Shop No 1031
Cell:+88 01738300741, 01914754535, +8801672883758